02S MIFARE DESFIRE EV1 SMARTCARD READER

SKU: AY-H6280B+P00 Category: Open to Secure® (O2S®)

Contactless smart card reader (13.56 MHz)
Meets ISO14443 Type A Standard
AES 128-bit encryption during transmission
Uses NXP SAM AV2 for identity and communication cryptography
Supports OSDP V2 including secure channel using AES 128 bit encryption for improved security
Reads O2S ID data from O2S credentials
Reads CSN of non-O2S credentials
Output formats:
Wiegand (per format on O2S credential)
OSDP via RS-485 (selected models)
RGB multicolor light indicator
Blue backlit tact switch keypad
IP68 water and dust resistant for AY-x6280 pigtail models
IP65 water and dust resistant for AY-x6280 terminal block models and AY-x6380 models
IK08 vandal resistant for all AY-x6x80 models
Optical back tamper sensor
Two LED control and buzzer control inputs
Pigtail or terminal block connectivity
Antimicrobial technology reduces level of microbes on reader by up to 99.99%.

Operating Voltage Range	6 to 16 VDC
Input Current at 12V	Stand by: 85mA, Maximum:110mA
Read Range (secure credential memory)	MIFARE Classic EV1: 40 to 45 mm (1.5 to 1.8 in.) MIFARE DESFire EV1: 25 mm (1 in.)
LED Control	Two Inputs: Green LED CTL and RED LED CTL–TTL
Auxiliary Input	Buzzer CTL or Hold CTL–TTL
Auxiliary Output	Tamper Output (OC, active low, max. sink current 30mA)
Supported Protocol	Wiegand OSDP Secure Channel V2
Secured Communication	OSDP V2 including secure channel AES 256-bit symmetric data encryption
Maximum Cable Distance to Controller	Wiegand:150m (500 ft) with18-AWGcable OSDP(RS-485):1200m (4,000 ft) with 2×2 18-AWG twisted shielded cable
Compatible Cards	MIFARE DESFireEV1 (2K, 4K, 8K, and MIFAREEV1 Classic (1K, 4K)
Outdoor Usage	Weather-resistant, epoxy potted, suitable for outdoor use
Vandal Resistance	IK08
Antimicrobial efficacy	Inhibits bacteria proliferation by up to 99.9%

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

No related firmware found.