NETWORK CAMERAS 
NETWORK PTZS CAMERA 
NETWORK VIDEO RECORDER 
VIDEO DOORBELL 
HD-TVI CAMERAS 
HD-TVI PTZ CAMERAS 
HD-TVI DVR 
NETWORK CAMERAS 
ACCESSORIES 
Shop
NR520-32 Embedded M Series 8K 32-Channel Network Video Recorder
SKU:
NR520-32
| Channel | 32 Channel |
|---|---|
| IP Video Input | 32-ch Upto32MP resolution *:After ultra HD resolution mode is enabled, the NVR supports up to 8-ch32MP/24 MP IP video inputs. |
| Incoming Bandwidth | 320Mbps |
| Outgoing Bandwidth | 400Mbps |
| Video Output Mode | HDMI1/VGA simultaneous output, HDMI2/VGA independent output |
| CVBS Output | 1-ch, BNC(1.0Vp-p, 75Ω), resolution:PAL:704×576, NTSC:704×480 |
| Audio Output | 1-ch, RCA(Linear, 1KΩ) |
| Two-Way Audio | 1-ch, RCA(2.0Vp-p, 1KΩ, using the audio input) |
| Decoding Format | H.265+/H.265/H.264+/H.264 |
| Synchronous Playback | 16-ch |
| Remote Connection | 128 |
| eSATA | 1 eSATA interface |
| HDD Support | 4 HDD |
| Capacity | Up to 14TB capacity for each disk |
| Serial Interface | 2 RS-485 (half-duplex), 1 RS-232 |
| Power Supply | 100 to 240 VAC, 50 to 60 Hz |
| Consumption | ≤ 15W(without HDD) |
| Chassis | 19-inch rack-mounted 1.5U chassis |
| Dimension (W × D ×H) | 445 × 400 ×75 mm(17.5″×15.7″ × 3.0″) |
| Weight | ≤ 5kg(without HDD, 11 lb.) |
NR52P24-32 32-ch 1.5U 24 PoE 8K AcuSense NVR
SKU:
NR52P24-32
| Channel | 32 Channel |
|---|---|
| IP Video Input | 32-ch Up to 32 MP resolution *: After ultra HD resolution mode is enabled, the NVR supports up to 8-ch 32 MP/24 MP IP video inputs. |
| Incoming Bandwidth | 320Mbps |
| Outgoing Bandwidth | 400Mbps |
| VGA Output | 1920×1080/60Hz, 1600×1200/60Hz, 1280×1024/60Hz, 1280×720/60Hz, 1024× 768/60Hz |
| Video Output Mode | HDMI1/VGA simultaneous output, HDMI2/VGA independent output |
| CVBS Output | 1-ch, BNC(1.0Vp-p, 75Ω), resolution:PAL:704×576, NTSC:704×480 |
| Audio Output | 1-ch, RCA(Linear, 1KΩ) |
| Two-Way Audio | 1-ch, RCA(2.0Vp-p, 1KΩ, usingtheaudioinput) |
| Decoding Format | H.265+/H.265/H.264+/H.264 |
| Synchronous Playback | 16-ch |
| Decoding Capability | 2-ch@32MP(30fps)/2-ch@24MP(30fps)/4-ch@12MP(20fps)/8-ch@8MP(25 fps)/16-ch@4MP(30fps)/32-ch@1080p(30fps) |
| Remote Connection | 128 |
| Interface | 24, RJ-4510/100Mbps self-adaptive Ethernet interface |
| Power | ≤210W |
| Standard | IEEE802.3af/at |
| eSATA | 1 eSATA interface |
| HDD Support | 4 HDD |
| Capacity | Up to 14 TB capacity for each disk |
| Serial Interface | 2RS-485(half-duplex), 1RS-232 |
| USB Interface | Front panel:2×USB2.0;Rear panel:1×USB3.0 |
| Power Supply | 100 to 240 VAC, 50 to 60 Hz |
| Consumption | ≤15W(without HDD and PoE off) |
| Dimension(W×D×H) | 445×400×75mm(17.5″×15.7″×3.0″) |
| Weight | ≤ 5 kg (without HDD, 11 lb.) |
NR52P6-16 16-ch 1.5U 16 PoE 8K Accsense NVR
SKU:
NR52P6-16
| Channel | 16 Channel |
|---|---|
| IP Video Input | 16-ch Up to 32 MP resolution *: After ultra HD resolution mode is enabled, the NVR supports up to 8-ch 32 MP/24 MP IP video inputs. |
| Incoming Bandwidth | 256 Mbps |
| Outgoing Bandwidth | 256 Mbps |
| HDMI 1 Output | 8K (7680 × 4320)/30Hz, 4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × 1080/60Hz |
| HDMI 2 Output | 4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × 1080/60Hz *: When HDMI 1 output resolution is 8K, the maximum HDMI 2 output resolution is 1080p |
| VGA Output | 1920 × 1080/60Hz |
| Video Output Mode | HDMI1/VGA simultaneous output, HDMI2/VGA independent output |
| CVBS Output | 1-ch, BNC (1.0 Vp-p, 75 Ω), resolution: PAL: 704 × 576, NTSC: 704 × 480 |
| Audio Output | 1-ch, RCA (Linear, 1 KΩ) |
| Two-Way Audio | 1-ch, RCA (2.0 Vp-p, 1 KΩ, using the audio input) |
| Decoding Format | H.265+/H.265/H.264+/H.264 |
| Recording Resolution | 32 MP/24 MP/12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA /4CIF/DCIF/ 2CIF/CIF/QCIF *: After ultra HD resolution mode is enabled, the NVR supports up to 8-ch 32 MP/24 MP IP video inputs. |
| Synchronous Playback | 16-ch |
| Decoding Capability | 2-ch@32 MP (30 fps)+2-ch@8MP（30fps）/10-ch@8 MP (30 fps)/20-ch@4 MP (30 fps)/40-ch@1080p (30 fps) |
| eSATA | 1 eSATA interface |
| HDD Support | 4 HDD |
| Capacity | Up to 16 TB capacity for each disk |
| Serial Interface | 2 RS-485 (half-duplex), 1 RS-232 |
| USB Interface | Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0 |
| Power Supply | 100 to 240 VAC, 50 to 60 Hz |
| Working Temperature | -10 °C to 55 °C (14 °F to 131 °F) |
| Chassis | 19-inch rack-mounted 1.5U chassis |
| Dimension | (W × D × H) 440 × 389 × 72 mm ( 17.3″× 15.3″ × 2.8″) |
| Weight | ≤ 5 kg (without HDD, 11 lb.) |
NR52P6-32 32-ch 1.5U 16 PoE 8K Accsense NVR
SKU:
NR52P6-32
| Channel | 32 Channel |
|---|---|
| IP Video Input | 32-ch Up to 32 MP resolution *: After ultra HD resolution mode is enabled, the NVR supports up to 8-ch 32 MP/24 MP IP video inputs. |
| Incoming Bandwidth | 320Mbps |
| Outgoing Bandwidth | 400Mbps |
| VGA Output | 1920 × 1080/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz |
| Video Output Mode | HDMI1/VGA simultaneous output, HDMI2/VGA independent output |
| CVBS Output | 1-ch, BNC (1.0 Vp-p, 75 Ω), resolution: PAL: 704 × 576, NTSC: 704 × 480 |
| Audio Output | 1-ch, RCA (Linear, 1 KΩ) |
| Two-Way Audio | 1-ch, RCA (2.0 Vp-p, 1 KΩ, using the audio input) |
| Decoding Format | H.265+/H.265/H.264+/H.264 |
| Synchronous Playback | 16-ch |
| Decoding Capability | 2-ch@32 MP (30 fps) + 2-ch@8 MP (30 fps)/10-ch@8 MP (30 fps)/20-ch@4 MP (30 fps)/40-ch@1080p (30 fps) |
| Remote Connection | 128 |
| Interface | 16, RJ-45 10/100 Mbps self-adaptive Ethernet interface |
| Power | ≤ 200 W |
| Standard | IEEE 802.3 af/at |
| eSATA | 1 eSATA interface |
| HDD Support | 4 HDD |
| Capacity | Up to 16 TB capacity for each disk |
| Serial Interface | 2 RS-485 (half-duplex), 1 RS-232 |
| USB Interface | Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0 |
| Power Supply | 100 to 240 VAC, 50 to 60 Hz |
| Consumption | ≤15W(without HDD and PoE off) |
| Dimension(W×D×H) | 445 × 400 × 75 mm ( 17.5″× 15.7″ × 3.0″) |
| Weight | ≤ 5 kg (without HDD, 11 lb.) |
NRA20-64 64 Channel 400M 2U 4K Super Network Video Recorder
SKU:
NRA20-64
| Channel | 64 Channel |
|---|---|
| HDD Support | 8 HDD |
| Two-Way Audio | 1-ch, RCA (2.0Vp-p,1KΩ,using the audio input) |
| Decoding Format | H.265+/H.265/H.264+/H.264 |
| Decoding Capability | 2-ch@32MP (30fps) +2-ch@8MP (30fps)/10-ch@8MP (30fps)/20-ch@4MP (30 fps)/40-ch@1080p (30fps) |
| Network Protocol | TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS |
| Network Interface | 2,RJ-4510/100/1000Mbpsself-adaptiveEthernetinterface |
| Serial Interface | 1RS-485 (full-duplex),1RS-232 |
| Power Supply | 100 to 240VAC, 50 to 60Hz |
| Consumption | ≤50W(without HDD) |
| Dimension (W×D×H) | 445×465×93mm (17.5″×18.3″×3.7″) |
| Weight | ≤10kg(22lb) |
NRT00-256/I24 256 Channel 768M 24 HDD Bay Super NVR
SKU:
NRT00-256/I24
| Alarm input / output | 8/16 channel |
|---|---|
| Audio Output | 1‐ch. RCA (2.0 Vp‐p, 1 KΩ) |
| Capability | 20‐ch@1080p |
| Capacity | Up to 10 TB for each HDD |
| Chassis | 4U |
| Decoding format | H.265, H.265+, H.264, H.264+, MPEG4, MJPEG (for Hikvision IP camera only) |
| Dimensions | 442 × 494 × 146 mm (17.4 × 19.4 × 5.7 inch) |
| Extension board (optional) | One extension board is supported with four 10M/100M/1000M optical interfaces (1.25 Gbps SFP module), eight RS‐485 interfaces, and alarm interface of 32 alarm inputs and 16 alarm outputs. |
| Fan | Redundant dual ball bearing fan; Speed adjustable; Hot‐plug |
| HDD Support | 16 HDD |
| HDMI output resolution | Two independent HDMI outputs of 4K resolution. Resolution: 4K (4096 × 2160), 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1080p (1920 × 1080)/60Hz, UXGA (1600 × 1200)/60Hz, SXGA (1280 × 1024)/60Hz, 720p (1280 × 720)/60Hz, XGA (1024 × 768)/60H |
| Incoming bandwidth | 768 Mbps |
| IP Video Input | 256‐ch |
| LCD output (optional) | One 7 inch LCD |
| Network Interface | 4, RJ45 10M/100M/1000M self‐adaptive Ethernet interface |
| Network Protocols | IPv6, HTTPS, UPnP, SNMP, NTP, SADP, SMTP, NFS, iSCSI, PPPoE, DDNS |
| Operating Humidity | 10% to 90% |
| Outgoing bandwidth | 768 Mbps |
| Power Consumption | ≤ 140W |
| Power Supply | 100 to 240 VAC, 550W |
| Protocol | HIKVISION, ACTi, ARECONT, AXIS, BOSCH, BRICKCOM, CANON, HUNT, ONVIF (Version 2.5), PANASONIC, PELCO, RTSP, SAMSUNG, SONY, VIVOTEK, ZAVIO |
| RAID Type | RAID0, RAID1, RAID5, RAID 6, and RAID10 |
| Serial Interface | 1 RS‐485, Keyboard |
| Storage extension | 1 × eSATA interface, 2 × mini SAS interface (optional) |
| Synchronous Playback | Up to 16 channels |
| Two-way audio input | 1‐ch, RCA (2.0 Vp‐p, 1 KΩ) |
| USB Interface | Front Panel: 2 × USB 2.0; Rear Panel: 2 × USB 3.0 |
| VGA output resolution | 1‐ch. Resolution: 1080p (1920 × 1080)/60Hz, UXGA (1600 × 1200)/60Hz, SXGA (1280 × 1024)/60Hz, 720p (1280 × 720)/60Hz, XGA (1024 × 768)/60Hz |
| Video resolution | 12 MP/8 MP/7 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF |
| Weight | ≤ 16 kg (35.3 lb) |
| Working Environment | 0 °C to + 50 °C (32 °F to 122 °F) |
NRT10-128/I16 128 Channel H.265+ 4K 576M 16 HDD Bay Super NVR
SKU:
NRT10-128/I16
| Alarm in/out | 8/16 channel |
|---|---|
| Audio output(video recorder) | 1-ch. RCA (2.0 Vp-p, 1 KΩ) |
| Auto-switch (video wall) | Supported |
| Capability | 20-ch@1080p |
| Capacity | Up to 8 TB for each HDD |
| Chassis | 3U |
| Collage (video wall) | Supported |
| Consumption (without hard disks) | ≤ 140W |
| Decoding board | 1 |
| Decoding capacity (video wall) | 48-ch@1080p |
| Decoding format | H.265, H.265+, H.264, H.264+, MPEG4, MJPEG (for Hikvision IP camera only) |
| Decoding resolution (video wall) | 12 MP/8 MP/7 MP/6 MP/5 MP/3 MP/1080p/UXGA/720p/VGA/4CIG/DCIF/2CIF/CIF/QCIF |
| Dimensions | 442 × 494 × 146 mm (17.4 × 19.4 × 5.7 inch) |
| Display local signal source on video wall | Supported |
| Extension board (optional) | One extension board is supported with four 10M/100M/1000M optical interfaces (1.25 Gbps SFP module), eight RS-485 interfaces, and alarm interface of 32 alarm inputs and 16 alarm outputs. |
| Fan | Redundant dual ball bearing fan; Speed adjustable; Hot-plug |
| HDMI input resolution (video wall) | 1080p (1920×1080), SXGA (1280×1024), 720p 1280×720), XGA (1024×768) |
| HDMI output resolution | Two independent HDMI outputs of 4K resolution. Resolution: 4K (4096 × 2160), 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1080p (1920 × 1080)/60Hz, UXGA (1600 × 1200)/60Hz, SXGA (1280 × 1024)/60Hz, 720p (1280 × 720)/60Hz, XGA (1024 × 768)/60Hz |
| HDMI output resolution (video wall) | 4K(3840×2160)/60Hz, 4K (3840×2160)/30Hz, 2K (2560×1440)/60Hz, 1080p (1920×1080)/60Hz, SXGA (1280×1024)/60Hz, 720p (1280×720)/60Hz, XGA (1024×768)/60Hz |
| HDMI output/input (Video wall) | 6/1 channel |
| Incoming bandwidth | 768 Mbps |
| Input protocol | HIKVISION, ACTi, ARECONT, AXIS, BOSCH, BRICKCOM, CANON, HUNT, ONVIF (Version 2.5), PANASONIC, PELCO, PSIA, RTSP, SAMSUNG, SONY, VIVOTEK, ZAVIO |
| IP Video Input | 128-ch |
| Layer overlay (video wall) | Supported |
| LCD output (optional) | One 7 inch LCD |
| Network interface (video recorder) | 4, RJ45 10M/100M/1000M self-adaptive Ethernet interface |
| Network Protocols | IPv6, HTTPS, UPnP, SNMP, NTP, SADP, SMTP, NFS, iSCSI, PPPoE, DDNS |
| Open window (video wall) | Supported |
| Outgoing bandwidth | 512 Mbps |
| Power Supply | 100 to 240 VAC, 550W |
| RAID Type | RAID0, RAID1, RAID5, RAID 6, and RAID10 |
| HDD Support | 16 HDD |
| Serial Interface | 1 RS-485, Keyboard |
| Synchronous Playback | Up to 16 channels |
| Two-way audio | 1-ch, RCA (2.0 Vp-p, 1 KΩ) |
| USB Interface | Front Panel: 2 × USB 2.0; Rear Panel: 2 × USB 3.0 |
| VGA output resolution | 1-ch. Resolution: 1080p (1920 × 1080) /60Hz, UXGA (1600 × 1200) /60Hz, SXGA (1280 × 1024) /60Hz, 720p (1280 × 720) /60Hz, XGA (1024 × 768) /60Hz |
| Video resolution | 12 MP/8 MP/7 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF |
| Weight | ≤ 16 kg (35.3 lb) |
| Window roaming (video wall) | Supported |
| Working humidity (video recorder) | 10% to 90% |
| Working temperature (video recorder) | 0 °C to + 50 °C (32 °F to 122 °F) |
NRT10-256/I16 Professional Series 4K Network Video Recorder
SKU:
NRT10-256/I16
| Alarm input / output | 8/16 channel |
|---|---|
| Audio Output | 1‐ch. RCA (2.0 Vp‐p, 1 KΩ) |
| Capability | 20‐ch@1080p |
| Capacity | Up to 10 TB for each HDD |
| Chassis | 3U |
| Decoding format | H.265, H.265+, H.264, H.264+, MPEG4, MJPEG (for Hikvision IP camera only) |
| Dimensions | 442 × 494 × 146 mm (17.4 × 19.4 × 5.7 inch) |
| Extension board (optional) | One extension board is supported with four 10M/100M/1000M optical interfaces (1.25 Gbps SFP module), eight RS‐485 interfaces, and alarm interface of 32 alarm inputs and 16 alarm outputs. |
| Fan | Redundant dual ball bearing fan; Speed adjustable; Hot‐plug |
| HDD Interface | 16 SATA interfaces supporting hot‐plug |
| HDMI output resolution | Two independent HDMI outputs of 4K resolution. Resolution: 4K (4096 × 2160), 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1080p (1920 × 1080)/60Hz, UXGA (1600 × 1200)/60Hz, SXGA (1280 × 1024)/60Hz, 720p (1280 × 720)/60Hz, XGA (1024 × 768)/60H |
| Incoming bandwidth | 768 Mbps |
| IP Video Input | 256‐ch |
| LCD output (optional) | One 7 inch LCD |
| Network Interface | 4, RJ45 10M/100M/1000M self‐adaptive Ethernet interface |
| Network Protocols | IPv6, HTTPS, UPnP, SNMP, NTP, SADP, SMTP, NFS, iSCSI, PPPoE, DDNS |
| Operating Humidity | 10% to 90% |
| Outgoing bandwidth | 768 Mbps |
| Power Consumption | ≤ 140W |
| Power Supply | 100 to 240 VAC, 550W |
| Protocol | HIKVISION, ACTi, ARECONT, AXIS, BOSCH, BRICKCOM, CANON, HUNT, ONVIF (Version 2.5), PANASONIC, PELCO, RTSP, SAMSUNG, SONY, VIVOTEK, ZAVIO |
| RAID Type | RAID0, RAID1, RAID5, RAID 6, and RAID10 |
| Serial Interface | 1 RS‐485, Keyboard |
| Storage extension | 1 × eSATA interface, 2 × mini SAS interface (optional) |
| Synchronous Playback | Up to 16 channels |
| Two-way audio input | 1‐ch, RCA (2.0 Vp‐p, 1 KΩ) |
| USB Interface | Front Panel: 2 × USB 2.0; Rear Panel: 2 × USB 3.0 |
| VGA output resolution | 1‐ch. Resolution: 1080p (1920 × 1080)/60Hz, UXGA (1600 × 1200)/60Hz, SXGA (1280 × 1024)/60Hz, 720p (1280 × 720)/60Hz, XGA (1024 × 768)/60Hz |
| Video resolution | 12 MP/8 MP/7 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF |
| Weight | ≤ 16 kg (35.3 lb) |
| Working Environment | 0 °C to + 50 °C (32 °F to 122 °F) |
NSW2020-10T-POE-IN UNV Ethernet 8 Port 88W PoE Switch
SKU:
NSW2020-10T-POE-IN
| Ports Type | 10×100Mbps network ports (RJ45), including 8 PoE ports |
|---|---|
| Switching capacity | 2 Gbps |
| Packet Buffer | 448K bit |
| MAC | 1K |
| Forwarding performance | 1.49Mpps |
| Prior Ports | 1 to 2 |
| Standards | IEEE802.3, IEEE802.3u, IEEE802.3az, IEEE802.3x, IEEE802.3af, IEEE802.3at |
| Power Supply | DC: 48/51V, powered by adapter(100 to 240V, 50/60Hz) |
| PoE Standard | IEEE 802.3 at, IEEE 802.3af |
| PoE Mode | ModeB (4578) |
| Max.PoE Power | Max capacity:88W Max capacity for single port: 30W |
| Max.Power | 94W |
| Cooling Fans | |
| Dimensions (W×D×H) | 171*103*25mm |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Operating Humidity | 10% to 90% (noncondensing) |
| Weight | 0.29KG |
NSW2020-16T1GT1GC-POE-IN UNV Ethernet 16 Port 225W PoE Switch
SKU:
NSW2020-16T1GT1GC-POE-IN
| Ports Type | 16×100Mbps PoE ports (RJ45)+ 1×1000Mbps Gigaethernet ports +1×1000Mbps Combo ports |
|---|---|
| Switching capacity | 7.2 Gbps |
| Packet Buffer | 4 M bit |
| MAC | 16K |
| Forwarding performance | 5.36Mpps |
| Prior Ports | 1 to 8 |
| Standards | IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.3az |
| Power Supply | AC: 100 to 240V, 50/60Hz |
| PoE Standard | IEEE 802.3 at, IEEE 802.3af |
| PoE Mode | ModeB (4578) |
| Max.PoE Power | Max capacity:250W Max capacity for single port: 30W |
| Max.Power | 265W |
| Cooling Fans | 1 |
| Dimensions (W×D×H) | 440*195*44mm |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Operating Humidity | 10% to 90% (noncondensing) |
| Weight | 2.12KG |
NSW2020-24T1GT1GC-POE-IN UNV Ethernet 24 Port 370W PoE Switch
SKU:
NSW2020-24T1GT1GC-POE-IN
| Ports Type | 24×100Mbps PoE ports (RJ45) + 1×1000Mbps Gigaethernet ports +1×1000Mbps Combo ports |
|---|---|
| Switching capacity | 8.8 Gbps |
| Packet Buffer | 4 M bit |
| MAC | 16K |
| Forwarding performance | 6.55Mpps |
| Prior Ports | 1 to 8 |
| Standards | IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.3az |
| Power Supply | AC: 100 to 240V, 50/60Hz |
| PoE Standard | IEEE 802.3 at, IEEE 802.3af |
| PoE Mode | ModeB (4578) |
| Max.PoE Power | Max capacity:370W Max capacity for single port: 30W |
| Max.Power | 390W |
| Cooling Fans | 1 |
| Dimensions (W×D×H) | 440*250*44mm |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Operating Humidity | 10% to 90% (noncondensing) |
| Weight | 2.93KG |
NSW2020-6T-POE-IN UNV Ethernet 4 Port 60W PoE Switch
SKU:
NSW2020-6T-POE-IN
| Ports Type | 6×100Mbps network ports (RJ45), including 4 PoE ports |
|---|---|
| Switching capacity | 1.2 Gbps |
| Packet Buffer | 448K bit |
| MAC | 1K |
| Forwarding performance | 0.90Mpps |
| Prior Ports | 1 to 2 |
| Standards | IEEE802.3, IEEE802.3u, IEEE802.3az, IEEE802.3x, IEEE802.3af, IEEE802.3at |
| Power Supply | DC: 48/51V, powered by adapter(100 to 240V, 50/60Hz) |
| PoE Standard | IEEE 802.3 at, IEEE 802.3af |
| PoE Mode | ModeB (4578) |
| Max.PoE Power | Max capacity:60W Max capacity for single port: 30W |
| Max.Power | 65W |
| Cooling Fans | |
| Dimensions (W×D×H) | 107*101*25mm |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Operating Humidity | 10% to 90% (noncondensing) |
| Weight | 0.19KG |
